fully by direct bearing

fully through fastenings

50% by direct bearing and 50% through fastenings

75% by direct bearing and 25% through fastenings

only shear stresses

only tensile stresses

both [a] and [b]

none of the above

is at the maximum distance from CG of the rivet group

is at the minimum distance from CG of the rivet group

gives the maximum angle between the two forces Fa and Fm

gives the minimum angle between the two forces Fa and Fm

lap joint

butt joint with single cover plate

butt joint with double cover plates

none of the above

1.0 mm

1.5 mm

2.0 mm

2.5 mm